INPUT
Connectors:	1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
Type:	Electronically balanced/unbalanced, RF filtered
Impedance	Balanced 40 kOhm, unbalanced 20 kOhm
Maximum Input Level:	>+21dBu balanced or unbalanced
CMRR:	>40dB, typically >55dB at 1kHz
OUTPUTS
Connectors:	1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
Type:	Impedance-balanaced/unbalanced, RF filtered
Impedance:	Balanced 200 ohm, unbalanced 100 ohm
Max Output Level:	>+21dBu balanced/unbalanced into 2 kOhm or greater >+18dBm balanced/unbalanced (into 600 ohm)
SYSTEM PERFORMANCE
Bandwidth:	20Hz to 20kHz, +0.5/-1dB
Frequency Response:	<10Hz to >50kHz, +0.5/-3dB
	+/-15dB range	+/-6dB range
Dynamic Range:	109dB	115dB
Signal-to-Noise:	90dB	97dB
THD + Noise:	<0.005%
Interchannel Crosstalk:	<-80db, 20Hz to 20kHz
FUNCTION SWITCHES
EQ Bypass:	Bypasses the graphic equalizer section in the signal path
Low Cut (recessed):	Activates the 40Hz 18dB/octave Bessel high-pass filter
Range (recessed):	Selects either +/- 6dB or +/- 15dB slider boost/cut range
INDICATORS
Output Level Meter:	4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
EQ Bypass:	1 LED: Red
Clip:	1 LED: Red
Low Cut:	1 LED: Red
+/-6dB:	1 LED: Yellow
+/-15dB:	1 LED: Red
POWER SUPPLY
Operating Voltage:	100VAC 50/60Hz, 120VAC 60Hz  230VAC 50/60Hz
Power consumption:	24W
Main Connection:	IEC receptacle
PHYSICAL
Dimensions:	3.5" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm)
Weight:	8.5 lbs. (3.9 kg)
Shipping Weight:	9.5 lbs. (4.3 kg)
Note: Specifications subject to change without notice.