INPUTS
Connectors:	Female XLR Pin 2 hot, pin 1 lift switch
Type:	Electronically balanced/unbalanced, RF filtered
Impedance:	Balanced > 20 k ohm, unbalanced > 10 k ohm
Maximum Input Level:	>+30dBu balanced, > +26dBu unbalanced
CMRR:	>100dB 20 Hz to 200 Hz, >80dB 200 Hz to 2 kHz, >60dB 2 kHz to 20 kHz
OUTPUTS
Connectors:	Male XLR Pin 2 hot
Type:	Transformer balanced/unbalanced, RF filtered.
Impedance:	Balanced 50ohm, unbalanced 25ohm
Maximum Output Level:	Bal >+30dBm (into 600 ohm). Unbalanced (with UNBAL switch engaged) >+24dBm (into 600 ohm).
SIDECHAIN SEND (OUTPUT)
Connector:	Male XLR Pin 2 hot
Type:	Unbuffered, hard-wired to INPUT, RF filtered
SIDECHAIN RETURN (INPUT)
Connector:	Female XLR Pin 2 hot
Type:	Electronically balanced/unbalanced, RF filtered
Impedance:	Balanced >20 k ohm, unbalanced >10k ohm
Maximum Input Level:	>+30dBu balanced or unbalanced
SYSTEM PERFORMANCE
0.1dB Bandwidth:	20 Hz to 20 kHz +0/-0.1dB, no gain reduction, unity gain
1.0dB Bandwidth:	<4 Hz to >40 kHz +0/-1.0dB, no gain reduction, unity gain
Frequency Response:	<2 Hz to >200 kHz +0/-3.0dB, no gain reduction, unity gain
Noise:	<-92dBu, unweighted, 20 Hz to 20 kHz measurement bandwidth
Dynamic Range:	>122dB
THD + Noise:	0.008% typical at +4dBu, 1kHz, unity gain
	0.05% typical at +30dBu, 1kHz, unity gain
	<0.1% any amount of compression up to 30dB, 1kHz
IMD:	<0.02% SMPTE 4:1, no gain reduction, unity gain
Deviation From Linear Phase:	<1.0 degree, <10 Hz to 200 kHz, 30dB of compression
Interchannel Crosstalk:	<-100dB, 20 Hz to 20 kHz
VCA:	dbx V8™
VCA Dynamic Range:	>127dB
VCA THD + Noise:	0.006% typical at +4dBu, 1 kHz, unity gain
Stereo Coupling:	True RMS Power Summing™
COMPRESSOR
Threshold Range:	-40 to +30dBu
Ratio:	1:1 to 4:1
Threshold Characteristic:	Selectable OverEasy? or hard knee
Attack/Release Modes:	Selectable Manual or Auto
Manual Attack Time:	Scalable program-dependent. Typically 400dB/msec to 1dB/msec
Manual Release Time:	Scalable program-dependent. Typically 4000dB/sec to 10dB/sec
Auto Attack Time:	Program-dependent, typically 15 ms for 10dB, 5 ms for 20dB, 3 ms for 30dB
Auto Release Time:	Program-dependent, typically 120dB/sec
Output Gain:	-20 to +20dB
LIMITER
Threshold Range:	+4dBu to >+30dBu (off)
Ratio:	4:1
Limiter Type:	PeakStopPlus? two-stage limiter
Stage 1:	Instantaneous Transient Clamp
Attack Time:	Zero
ReleaseTime:	Zero
Stage 2:	Intelligent Predictive Limiting
Attack Time:	Program dependent, typically <5 msec.
Release Time:	Program dependent, typically 22dB/sec
PHYSICAL
Dimensions:	3.5” H X 19” W X 11.25” D
Weight:	20.5 lbs (9.3 kg)
Shipping Weight:	25.0 lbs (11.3 kg)
Note: 0 dBu = 0.775V RMS.
Specifications are subject to change without notice.