신제품] 차세대 솔루션 dbx DriveRack 4800

DriveRack의 새로운 대표모델 dbx4800은 놀라운 유연성과 직관적인 컨트롤을 제공하며, 음질에 있어 우리의 기대를 초월합니다. 강력한 96kHz DSP 엔진과 전형적인 아날로그, 디지털 I/O에서 VGA 디스플레이와 멀티 컨트롤 패널까지, dbx4800은 모든 프로세싱과 유연성 그리고 라이브 현장이나 인스톨에 필요한 모든 조정기능을 제공합니다. 마법사 세팅 기능은 dbx4800의 시스템 Configuration과 Auto-EQ 그리고 Advanced Feedback Suppression 기능을 포함하여 시스템 셋업을 하는데 필요한 기본 메뉴를 제공하므로 편의성과 우수성이 한층 더 발전하였습니다. 선택사양으로 CobraNet card가 신호처리에 대한 유연성을 높여 주고, 또한 96kHz의 Processing Engine과 Standard Digital I/O는 소리에 대한 반응속도를 더욱 민감하게 처리, 신호처리 속도에 있어서도 성능이 향상되었습니다. Ethernet 포트는 손쉽게 시스템 통합을 실현하였고, 칼라 Display와 손쉬운 조작을 위해 Channel Buttons도 적용하였습니다.

<중요특징>

ANALOG INPUTS Number of Inputs: (4) Connectors: Female XLR Type: Electronically balanced, RF filtered Impedance: > 50kΩ Maximum Input Level: Software selectable for: +28, +26, +24, +22, +20, +18, +16, +14 dBu CMRR: >40 dB typical, >55 dB at 1 kHz DIGITAL INPUTS Inputs (4) AES/EBU Channels Connectors: Female XLR Type: Transformer Isolated, RF filtered Impedance: >110 ohms RTA INPUTS Input (1) Analog Connectors: Female XLR Gain Range: 10dB to 50dB in 10dB increments ANALOG OUTPUTS Inputs: (8) Connectors: Male XLR Type: Electronically balanced, RF filtered Impedance: 30ohms Max Output Levels Software selectable for: +24, +22, +20, +12, +8, +4 dBu DIGITAL OUTPUTS Outputs (8) AES/EBU Channels Connectors: Male XLR Type: Transformer Isolated, RF filtered Impedance: >110 ohms A/D Performance Type: dbx Type IV™ Conversion System Dynamic Range: >114 dB unweighted, 116dB A-weighted Type IV™ dynamic range: 128dB with transient material, A-weighted, 22kHz BW 126 dB with transient material, unweighted, 22 kHz BW 120 dB typical with program material, A-weighted, 22 kHz BW Sample Rate: 96kHz A/D Wordlength: 24 bits D/A PERFORMANCE Dynamic Range: 112 dB unweighted, 115 dB A-weighted Sample Rate: 96 kHz D/A Wordlength: 24 bit SYSTEM PERFORMANCE Dynamic Range: 112dB unweighted, 115dB A-weighted Internal Processing: 32 bit floating point THD + Noise: 0.004% typical at +4 dBu, 1 kHz, 0 dB input gain Frequency Response: 20 Hz- 40 kHz, +/-0.5 dB Interchannel Crosstalk: <-85 dB at 1 kHz, 0 dB input gain PROCESSING Pre EQ Type: One 31-band Graphic EQ on each input One EQ that is switchable between 31-band and 9-band Parametric on each input Range: +/- 12dB Input Insert Processing: Two selectable Insert Processing blocks per input Type: Noise Gate, Compressor, Auto Gain Control, De-Esser, Sub-Harmonic Synth, Advanced Feedback Suppression Input Delay Length: Up to 682 mSec available Routing/Mixing: 4-input mixer available at each output allowing any input to be sent or mixed to any output Output Insert Processing: Two selectable Insert Processing blocks per output Type: Noise Gate, AutoWarmth??, Compressor, Auto Gain Control, Peak Limiter, Sub-Harmonic Synth, Advanced Feedback Suppression X-Over Filter Configs: 1x1, 1x2, 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 2x2, 2x3, 2x4 2x5, 2x6, 2x7, 2x8, 3x3, 3x4, 3x6, 3x7, 4x4, 4x5, 4x8 Types: Bessel 6, 12, 18, and 24 dB per Octave Butterworth 6, 12, 18, and 24 dB per Octave Linkwitz-Riley 12, 24, 36, and 48 dB per Octave Polarity: Positive and Negative Phase Control: 0 to -180 degrees in 5 degree increments Output Delay Length: 1365 mSec shared between the outputs MISCELLANEOUS I/O Transformers: Optional CobraNet?? I/O: Optional Control: Ethernet, RS-232, Optional dbx ZC Wall Panels Power Requirements: 100V to 240V 50/60Hz, 45 Watts Dimensions: 3.5"x19"x12.15" Weight: 11 lbs. Shipping Weight: 12.5 lbs. Note: Specifications subject to change without notice.